Courses delivered by HAZWOPER OSHA Training, LLC, an IACET Accredited ProviderDelivered by an IACET Accredited Provider

Last reviewed: September 18, 2026 by HAZWOPER OSHA Training's curriculum team

Regulatory Reference

OSHA Standards Crosswalk

Exactly which OSHA confined space regulation each of our four courses is designed around, section by section. This page is general guidance, not legal advice; always confirm current requirements against the official standard.

OSHA Standard What It Covers Awareness Permit-Required Entry Supervisor Competent Person
29 CFR 1926 Subpart AA
Confined Spaces in Construction (overview)
Identifying/classifying spaces, written permit program, training, rescue planning. ✅ Primary ✅ Primary ✅ Primary ✅ Primary
1926.1207
Training
Who must be trained, in what, and when retraining is required. ✅ Core ✅ Core ◻︎ Referenced ◻︎ Referenced
1926.1208
Duties of Authorized Entrants
What an entrant must know and do before, during, and after entry. ◻︎ Overview only ✅ Core ◻︎ Referenced ◻︎ Referenced
1926.1209
Duties of Attendants
Continuous monitoring, communication, and evacuation authority. ◻︎ Overview only ✅ Core ◻︎ Referenced ◻︎ Referenced
1926.1210
Duties of Entry Supervisors
Authorization, verification, and oversight of permit-required entries. — ◻︎ Referenced ✅ Core ◻︎ Referenced
1926.1211
Rescue & Emergency Services
Verified rescue capability before entry begins. — ◻︎ Referenced ✅ Core ✅ Core
29 CFR 1910.146
General Industry Permit-Required Confined Spaces
General industry counterpart to Subpart AA, sharing the same core roles. ◻︎ Referenced ◻︎ Referenced ◻︎ Referenced ◻︎ Referenced

✅ Core = the section the course is primarily built around. ◻︎ Referenced = covered as supporting/overlap content. This mapping describes course design intent, not a legal certification that a specific student meets every duty under a given section; see our Credential Transparency page.

Related Reading

Go Deeper

OSHA Confined Space Standards

Plain-language summaries of each standard, with official links.

Which Course Do I Need?

Match your role to the right course before you enroll.

Employer Training Resources

Free recordkeeping packets, checklists, and signoff forms.

The standard, section by section

What each section of Subpart AA covers

Subpart AA runs from 1926.1200 to 1926.1213. The sections our courses map to are only part of it. Here's the whole structure, so you can see where each requirement lives:

SectionTitleWhat it requires, in brief
1926.1200Reserved
1926.1201ScopeWhich construction work the subpart covers and what's excluded
1926.1202DefinitionsConfined space, permit space, hazardous atmosphere, entry, roles and more
1926.1203General requirementsCompetent person evaluation, signs, multi-employer coordination, reclassification and alternate procedures
1926.1204Permit-required confined space programThe written program: preventing unauthorized entry, hazard control, testing and monitoring, equipment, roles, rescue and review
1926.1205Permitting processPreparing, signing, suspending and canceling permits, and keeping canceled permits for at least one year
1926.1206Entry permitWhat the permit must contain
1926.1207TrainingWho is trained, when, at no cost, in an understandable language, with certification
1926.1208Duties of authorized entrantsWhat entrants must know and do
1926.1209Duties of attendantsMonitoring, communication, summoning rescue and never entering to rescue unless trained, equipped and relieved
1926.1210Duties of entry supervisorsVerifying, authorizing, overseeing and terminating entries
1926.1211Rescue and emergency servicesEvaluating rescue services, in-house teams, retrieval systems and medical information
1926.1212Employee participationConsulting employees on the program and giving them access to information
1926.1213Provision of documents to the SecretaryMaking required documents available to OSHA

How to use this crosswalk

The course mapping above describes what each course is designed around. Use it to build a training matrix: list each worker, the roles they actually perform, and the course and site-specific training that covers each role. Where one person fills more than one role, they need the training for each.

Employers in general industry can map the same concepts to 1910.146, where the program is in paragraph (c) and (d), permits in (e) and (f), training in (g), the three entry roles in (h) through (j), and rescue in (k). See construction vs. general industry for the differences.

Find the Course That Matches Your Role

Four courses, online. Certificate on completion. English & Spanish.